Post by jafet on May 8, 2021 4:00:44 GMT
I just installed (I am new to Linux) Bodhi (latest release) on a HP 15-F009WM. I love it! but I need help, my touchpad works well 70% of the time and the other 30% it jumps around super fast, and/or detects my finger touch when I slide over the pad as me clicking everywhere so it clicks over a ton of places in a couple of seconds. I scoured the web and there is nothing specific, the best article just had a command line to disable palm detection and I am new so I didn't want to start running commands willy-nilly. Can I get to a GUI where I can toggle between options and adjust the sensitivity of the pad and what happens when I tap on the corners of the pad?
Thanks in advance!!!
Thanks in advance!!!
System: Host: bodhi-Fetti-Notebook-PC Kernel: 4.15.0-88-generic x86_64
bits: 64 gcc: 7.4.0
Desktop: Enlightenment 0.3.3.16882 Distro: Ubuntu 18.04.5 LTS
Machine: Device: laptop System: Hewlett-Packard product: HP 15 Notebook PC v: 096E100003405E00050360180 serial: N/A
Mobo: Hewlett-Packard model: 2330 v: 99.15 serial: N/A
UEFI: Insyde v: F.23 date: 01/15/2015
Battery BAT0: charge: 33.2 Wh 100.1% condition: 33.2/33.2 Wh (100%)
model: Hewlett-Packard Primary status: Full
CPU: Dual core AMD E1-2100 APU with Radeon HD Graphics (-MCP-)
arch: Jaguar rev.1 cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 3992
clock speeds: max: 1000 MHz 1: 987 MHz 2: 950 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Kabini [Radeon HD 8210]
bus-ID: 00:01.0
Display Server: x11 (X.Org 1.19.6 )
drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1366x768@59.99hz
OpenGL: renderer: AMD KABINI (DRM 2.50.0, 4.15.0-88-generic, LLVM 10.0.0)
version: 4.5 Mesa 20.0.8 Direct Render: Yes
Audio: Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
driver: snd_hda_intel bus-ID: 00:14.2
Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture v: k4.15.0-88-generic
Network: Card-1: Realtek RTL8188EE Wireless Network Adapter
driver: rtl8188ee port: 3000 bus-ID: 01:00.0
IF: wlo1 state: up mac: <filter>
Card-2: Realtek RTL810xE PCIE Fast Ethernet controller
driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 05:00.0
IF: eno1 state: down mac: <filter>
Drives: HDD Total Size: 500.1GB (1.5% used)
ID-1: /dev/sda model: ST500LT012 size: 500.1GB
Partition: ID-1: / size: 195G used: 6.9G (4%) fs: ext4 dev: /dev/sda7
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 51.2C mobo: N/A gpu: 52.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 139 Uptime: 3:39 Memory: 1138.2/15507.1MB
Init: systemd runlevel: 5 Gcc sys: 7.5.0
Client: Shell (bash 4.4.201) inxi: 2.3.56
bits: 64 gcc: 7.4.0
Desktop: Enlightenment 0.3.3.16882 Distro: Ubuntu 18.04.5 LTS
Machine: Device: laptop System: Hewlett-Packard product: HP 15 Notebook PC v: 096E100003405E00050360180 serial: N/A
Mobo: Hewlett-Packard model: 2330 v: 99.15 serial: N/A
UEFI: Insyde v: F.23 date: 01/15/2015
Battery BAT0: charge: 33.2 Wh 100.1% condition: 33.2/33.2 Wh (100%)
model: Hewlett-Packard Primary status: Full
CPU: Dual core AMD E1-2100 APU with Radeon HD Graphics (-MCP-)
arch: Jaguar rev.1 cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 3992
clock speeds: max: 1000 MHz 1: 987 MHz 2: 950 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Kabini [Radeon HD 8210]
bus-ID: 00:01.0
Display Server: x11 (X.Org 1.19.6 )
drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1366x768@59.99hz
OpenGL: renderer: AMD KABINI (DRM 2.50.0, 4.15.0-88-generic, LLVM 10.0.0)
version: 4.5 Mesa 20.0.8 Direct Render: Yes
Audio: Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
driver: snd_hda_intel bus-ID: 00:14.2
Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture v: k4.15.0-88-generic
Network: Card-1: Realtek RTL8188EE Wireless Network Adapter
driver: rtl8188ee port: 3000 bus-ID: 01:00.0
IF: wlo1 state: up mac: <filter>
Card-2: Realtek RTL810xE PCIE Fast Ethernet controller
driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 05:00.0
IF: eno1 state: down mac: <filter>
Drives: HDD Total Size: 500.1GB (1.5% used)
ID-1: /dev/sda model: ST500LT012 size: 500.1GB
Partition: ID-1: / size: 195G used: 6.9G (4%) fs: ext4 dev: /dev/sda7
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 51.2C mobo: N/A gpu: 52.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 139 Uptime: 3:39 Memory: 1138.2/15507.1MB
Init: systemd runlevel: 5 Gcc sys: 7.5.0
Client: Shell (bash 4.4.201) inxi: 2.3.56
