Issue with Keyboard Layout Switching

Hello Bodhi Linux Community,

I've encountered a perplexing issue with my keyboard layout that I hope to get some insights on. After exploring the configuration options for language definitions and installing language support, I suspect that this might have contributed to the problem.

I'm currently using the Moksha desktop environment with `lightdm` as the display manager. Despite checking, I found that there are no keyboard shortcuts defined for switching the keyboard layout, which rules out the possibility of accidental layout toggling.

Another user suggested that the issue might stem from conflicting configurations between the system and the desktop environment, triggering an unexpected switch. My issue reminds him of an old issue he had with Xfce4, where despite setting the layout to Neo2 via `setxkbmap`, it reverted to QWERTY because Xfce4's configuration had it set as the primary layout.

Any advice or suggestions would be greatly appreciated, especially if anyone has experienced something similar or can point me towards a resolution.

I've tried to investigate the isseu and to solve it for hours, but the issue comes back every time.

Thank you in advance for your assistance!


System:    Kernel: 5.4.0-72-generic x86_64 bits: 64 Desktop: Moksha 0.3.4.17346
          Distro: Ubuntu 20.04.6 LTS (Focal Fossa)
Machine:   Type: Desktop Mobo: ASRock model: N68-S serial: <filter> BIOS: American Megatrends v: P1.60
          date: 09/21/2009
CPU:       Info: Dual Core model: AMD Athlon II X2 240 bits: 64 type: MCP cache: L2: 2 MiB
          Speed: 2800 MHz min/max: 800/2800 MHz Core speeds (MHz): 1: 2800 2: 2800
Graphics:  Device-1: NVIDIA C61 [GeForce 7025 / nForce 630a] driver: nouveau v: kernel
          Display: x11 server: X.Org 1.20.13 driver: loaded: nouveau resolution: 1280x1024~60Hz
          OpenGL: renderer: NV4C v: 2.1 Mesa 21.2.6
Audio:     Device-1: NVIDIA MCP61 High Definition Audio driver: snd_hda_intel
          Sound Server-1: ALSA v: k5.4.0-72-generic running: yes
          Sound Server-2: PulseAudio v: 13.99.1 running: yes
Network:   Device-1: NVIDIA MCP61 Ethernet type: network bridge driver: forcedeth
          IF: enp0s7 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth: Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb
          Report: hciconfig ID: hci0 state: up address: <filter> bt-v: 2.1
Drives:    Local Storage: total: 1.2 TiB used: 380.83 GiB (31.1%)
          ID-1: /dev/sda vendor: Seagate model: ST1000DM003-1CH162 size: 931.51 GiB
          ID-2: /dev/sdb vendor: OCZ model: AGILITY4 size: 119.24 GiB
          ID-3: /dev/sdc type: USB vendor: SanDisk model: Ultra size: 57.3 GiB
          ID-4: /dev/sde type: USB model: USB DISK 3.2 size: 117.19 GiB
Partition: ID-1: / size: 54.55 GiB used: 37.2 GiB (68.2%) fs: ext4 dev: /dev/sda5
          ID-2: /home size: 310.82 GiB used: 295.95 GiB (95.2%) fs: ext4 dev: /dev/sda7
          ID-3: /tmp size: 2.82 GiB used: 77 MiB (2.7%) fs: ext4 dev: /dev/sda10
Swap:      ID-1: swap-1 type: partition size: 3.83 GiB used: 1.16 GiB (30.2%) dev: /dev/sdb8
          ID-2: swap-2 type: partition size: 1.91 GiB used: 0 KiB (0.0%) dev: /dev/sda8
Sensors:   System Temperatures: cpu: 36.9 C mobo: N/A
          Fan Speeds (RPM): N/A
Info:      Processes: 247 Uptime: 12h 6m Memory: 3.6 GiB used: 2.99 GiB (83.1%) Shell: Bash inxi: 3.3.08