Post by rexo on Mar 29, 2024 23:25:52 GMT
inxi -Fxz
System:
Kernel: 5.15.0-100-generic x86_64 bits: 64 compiler: gcc v: 11.4.0
Desktop: Moksha 0.4.1.17825 Distro: Ubuntu 22.04 (Jammy Jellyfish)
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING Z790-PLUS WIFI v: Rev 1.xx
serial: <superuser required> UEFI: American Megatrends v: 1603
date: 12/04/2023
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard
charge: 55% (should be ignored) status: Discharging
CPU:
Info: 24-core (8-mt/16-st) model: 13th Gen Intel Core i9-13900K bits: 64
type: MST AMCP arch: N/A rev: 1 cache: L1: 2.1 MiB L2: 32 MiB L3: 36 MiB
Speed (MHz): avg: 4714 high: 5812 min/max: 800/5500:5800:4300 cores:
1: 4500 2: 4507 3: 5500 4: 5511 5: 5500 6: 5511 7: 5500 8: 5513 9: 4800
10: 4694 11: 4803 12: 5812 13: 5500 14: 5513 15: 4500 16: 4500 17: 4296
18: 4295 19: 4308 20: 4283 21: 4303 22: 4295 23: 4320 24: 4287 25: 4273
26: 4282 27: 4304 28: 4256 29: 4322 30: 4295 31: 4278 32: 4302
bogomips: 191692
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] vendor: ASUSTeK
driver: nouveau v: kernel bus-ID: 01:00.0
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: nouveau resolution: 1: 1920x1080~60Hz
2: 1920x1080~60Hz 3: 1920x1080~60Hz
OpenGL: renderer: llvmpipe (LLVM 15.0.7 256 bits)
v: 4.5 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
Audio:
Device-1: Intel vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3
Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 01:00.1
Sound Server-1: ALSA v: k5.15.0-100-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel driver: iwlwifi v: kernel port: N/A bus-ID: 00:14.3
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Intel vendor: ASUSTeK driver: igc v: kernel port: N/A
bus-ID: 06:00.0
IF: eno1 state: down mac: <filter>
IF-ID-1: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A
mac: <filter>
IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth:
Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 1-14:4
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter>
RAID:
Hardware-1: Intel Device driver: N/A v: N/A bus-ID: 00:0e.0
Drives:
Local Storage: total: 3.64 TiB used: 276.42 GiB (7.4%)
ID-1: /dev/nvme0n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 38.9 C
ID-2: /dev/nvme1n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 36.9 C
Partition:
ID-1: / size: 1.79 TiB used: 46.9 GiB (2.6%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 11.9 MiB (2.3%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
System Temperatures: cpu: 27.8 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 459 Uptime: 25m Memory: 62.53 GiB used: 1.97 GiB (3.2%)
Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2622 Shell: Bash
v: 5.1.16 inxi: 3.3.13
You may think that this post doesn't belong here but I suspect it may.
I have Proton VPN
In firefox and chromium if I go to a site such as my-location.org/ to check what my locations is:
Firefox shows my true address
Chromium shows my true address
Brave shows my vpn address.
I have done the above on a virtual windows machine and a different Bodhi computer and they work correctly displaying only my vpn address.
I have completely removed firefox and any directories associated with it and reinstalled it.
Same results.
If I use ip.me or dns leak all the browsers show my vpm address.
In bodhi I have disabled every Notification that could be connected to the problem.
I have been working with Proton VPN support and they are stumped so far.
Any Ideas?
Thanks
System:
Kernel: 5.15.0-100-generic x86_64 bits: 64 compiler: gcc v: 11.4.0
Desktop: Moksha 0.4.1.17825 Distro: Ubuntu 22.04 (Jammy Jellyfish)
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING Z790-PLUS WIFI v: Rev 1.xx
serial: <superuser required> UEFI: American Megatrends v: 1603
date: 12/04/2023
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard
charge: 55% (should be ignored) status: Discharging
CPU:
Info: 24-core (8-mt/16-st) model: 13th Gen Intel Core i9-13900K bits: 64
type: MST AMCP arch: N/A rev: 1 cache: L1: 2.1 MiB L2: 32 MiB L3: 36 MiB
Speed (MHz): avg: 4714 high: 5812 min/max: 800/5500:5800:4300 cores:
1: 4500 2: 4507 3: 5500 4: 5511 5: 5500 6: 5511 7: 5500 8: 5513 9: 4800
10: 4694 11: 4803 12: 5812 13: 5500 14: 5513 15: 4500 16: 4500 17: 4296
18: 4295 19: 4308 20: 4283 21: 4303 22: 4295 23: 4320 24: 4287 25: 4273
26: 4282 27: 4304 28: 4256 29: 4322 30: 4295 31: 4278 32: 4302
bogomips: 191692
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] vendor: ASUSTeK
driver: nouveau v: kernel bus-ID: 01:00.0
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: nouveau resolution: 1: 1920x1080~60Hz
2: 1920x1080~60Hz 3: 1920x1080~60Hz
OpenGL: renderer: llvmpipe (LLVM 15.0.7 256 bits)
v: 4.5 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
Audio:
Device-1: Intel vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3
Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 01:00.1
Sound Server-1: ALSA v: k5.15.0-100-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel driver: iwlwifi v: kernel port: N/A bus-ID: 00:14.3
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Intel vendor: ASUSTeK driver: igc v: kernel port: N/A
bus-ID: 06:00.0
IF: eno1 state: down mac: <filter>
IF-ID-1: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A
mac: <filter>
IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth:
Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 1-14:4
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter>
RAID:
Hardware-1: Intel Device driver: N/A v: N/A bus-ID: 00:0e.0
Drives:
Local Storage: total: 3.64 TiB used: 276.42 GiB (7.4%)
ID-1: /dev/nvme0n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 38.9 C
ID-2: /dev/nvme1n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 36.9 C
Partition:
ID-1: / size: 1.79 TiB used: 46.9 GiB (2.6%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 11.9 MiB (2.3%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
System Temperatures: cpu: 27.8 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 459 Uptime: 25m Memory: 62.53 GiB used: 1.97 GiB (3.2%)
Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2622 Shell: Bash
v: 5.1.16 inxi: 3.3.13
You may think that this post doesn't belong here but I suspect it may.
I have Proton VPN
In firefox and chromium if I go to a site such as my-location.org/ to check what my locations is:
Firefox shows my true address
Chromium shows my true address
Brave shows my vpn address.
I have done the above on a virtual windows machine and a different Bodhi computer and they work correctly displaying only my vpn address.
I have completely removed firefox and any directories associated with it and reinstalled it.
Same results.
If I use ip.me or dns leak all the browsers show my vpm address.
In bodhi I have disabled every Notification that could be connected to the problem.
I have been working with Proton VPN support and they are stumped so far.
Any Ideas?
Thanks