Post by rexo on Jan 27, 2024 23:27:16 GMT
Recently build system with bodhi standard kernel
Asus Z790 with WiFi motherboard
Pulseaudio installed
Blueman installed
Bluez installed
inxi -Fxz
System:
Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0
Desktop: Moksha 0.4.1.17825 Distro: Ubuntu 22.04 (Jammy Jellyfish)
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING Z790-PLUS WIFI v: Rev 1.xx
serial: <superuser required> UEFI: American Megatrends v: 1603
date: 12/04/2023
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard
charge: 55% (should be ignored) status: Discharging
CPU:
Info: 24-core (8-mt/16-st) model: 13th Gen Intel Core i9-13900K bits: 64
type: MST AMCP arch: N/A rev: 1 cache: L1: 2.1 MiB L2: 32 MiB L3: 36 MiB
Speed (MHz): avg: 4904 high: 5538 min/max: 800/5500:5800:4300 cores:
1: 5500 2: 5513 3: 5500 4: 5512 5: 5500 6: 5502 7: 5500 8: 5500 9: 5538
10: 5513 11: 5500 12: 5526 13: 5500 14: 5527 15: 5408 16: 5500 17: 4298
18: 4292 19: 4304 20: 4266 21: 4302 22: 4302 23: 4314 24: 4301 25: 4304
26: 4336 27: 4305 28: 4304 29: 4316 30: 4336 31: 4312 32: 4312
bogomips: 191692
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] vendor: ASUSTeK
driver: nouveau v: kernel bus-ID: 01:00.0
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: nouveau resolution: 1: 1920x1080~60Hz
2: 1920x1080~60Hz 3: 1920x1080~60Hz
OpenGL: renderer: llvmpipe (LLVM 15.0.7 256 bits)
v: 4.5 Mesa 23.0.4-0ubuntu1~22.04.1 direct render: Yes
Audio:
Device-1: Intel vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3
Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 01:00.1
Sound Server-1: ALSA v: k5.15.0-91-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel driver: iwlwifi v: kernel port: N/A bus-ID: 00:14.3
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Intel vendor: ASUSTeK driver: igc v: kernel port: N/A
bus-ID: 06:00.0
IF: eno1 state: down mac: <filter>
IF-ID-1: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A
mac: <filter>
IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth:
Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 1-14:4
Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter>
RAID:
Hardware-1: Intel Device driver: N/A v: N/A bus-ID: 00:0e.0
Drives:
Local Storage: total: 3.64 TiB used: 98.8 GiB (2.7%)
ID-1: /dev/nvme0n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 37.9 C
ID-2: /dev/nvme1n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 34.9 C
Partition:
ID-1: / size: 1.79 TiB used: 22.91 GiB (1.3%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 11.9 MiB (2.3%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
System Temperatures: cpu: 27.8 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 543 Uptime: 3d 2h 47m Memory: 62.53 GiB used: 9.24 GiB (14.8%)
Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2161 Shell: Bash
v: 5.1.16 inxi: 3.3.13
Main Problem that I am working on.
sudo dmesg | grep iwlwifi
[ 2.585794] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 2.590796] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-66.ucode failed with error -2
[ 2.590867] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-65.ucode failed with error -2
[ 2.591710] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[ 2.591720] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.25
[ 2.591922] iwlwifi 0000:00:14.3: loaded firmware version 64.97bbee0a.0 so-a0-gf-a0-64.ucode op_mode iwlmvm
[ 2.622564] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x430
[ 2.793899] iwlwifi 0000:00:14.3: loaded PNVM version 0x181407b3
[ 2.811120] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000
[ 2.878298] iwlwifi 0000:00:14.3: base HW address: dc:46:28:66:dd:d4
[ 2.912931] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
The current problem I found working on my bluetooth problem above.
When running bluman-manager without sudo I was getting
When I ran it with sudo I didn't get any errors so I changed permissions to 777 for bluetooth-manager and now I get the error
(blueman-manager:129308): dbind-WARNING **: 13:53:54.062: Couldn't connect to accessibility bus: Failed to connect to socket /root/.cache/at-spi/bus_0.0: Permission denied
And now I'm stuck. I'm not sure what the problem is.
Asus Z790 with WiFi motherboard
Pulseaudio installed
Blueman installed
Bluez installed
inxi -Fxz
System:
Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0
Desktop: Moksha 0.4.1.17825 Distro: Ubuntu 22.04 (Jammy Jellyfish)
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING Z790-PLUS WIFI v: Rev 1.xx
serial: <superuser required> UEFI: American Megatrends v: 1603
date: 12/04/2023
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard
charge: 55% (should be ignored) status: Discharging
CPU:
Info: 24-core (8-mt/16-st) model: 13th Gen Intel Core i9-13900K bits: 64
type: MST AMCP arch: N/A rev: 1 cache: L1: 2.1 MiB L2: 32 MiB L3: 36 MiB
Speed (MHz): avg: 4904 high: 5538 min/max: 800/5500:5800:4300 cores:
1: 5500 2: 5513 3: 5500 4: 5512 5: 5500 6: 5502 7: 5500 8: 5500 9: 5538
10: 5513 11: 5500 12: 5526 13: 5500 14: 5527 15: 5408 16: 5500 17: 4298
18: 4292 19: 4304 20: 4266 21: 4302 22: 4302 23: 4314 24: 4301 25: 4304
26: 4336 27: 4305 28: 4304 29: 4316 30: 4336 31: 4312 32: 4312
bogomips: 191692
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] vendor: ASUSTeK
driver: nouveau v: kernel bus-ID: 01:00.0
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: nouveau resolution: 1: 1920x1080~60Hz
2: 1920x1080~60Hz 3: 1920x1080~60Hz
OpenGL: renderer: llvmpipe (LLVM 15.0.7 256 bits)
v: 4.5 Mesa 23.0.4-0ubuntu1~22.04.1 direct render: Yes
Audio:
Device-1: Intel vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3
Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 01:00.1
Sound Server-1: ALSA v: k5.15.0-91-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel driver: iwlwifi v: kernel port: N/A bus-ID: 00:14.3
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Intel vendor: ASUSTeK driver: igc v: kernel port: N/A
bus-ID: 06:00.0
IF: eno1 state: down mac: <filter>
IF-ID-1: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A
mac: <filter>
IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth:
Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 1-14:4
Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter>
RAID:
Hardware-1: Intel Device driver: N/A v: N/A bus-ID: 00:0e.0
Drives:
Local Storage: total: 3.64 TiB used: 98.8 GiB (2.7%)
ID-1: /dev/nvme0n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 37.9 C
ID-2: /dev/nvme1n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 1.82 TiB temp: 34.9 C
Partition:
ID-1: / size: 1.79 TiB used: 22.91 GiB (1.3%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 11.9 MiB (2.3%) fs: vfat
dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
System Temperatures: cpu: 27.8 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 543 Uptime: 3d 2h 47m Memory: 62.53 GiB used: 9.24 GiB (14.8%)
Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2161 Shell: Bash
v: 5.1.16 inxi: 3.3.13
Main Problem that I am working on.
sudo dmesg | grep iwlwifi
[ 2.585794] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 2.590796] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-66.ucode failed with error -2
[ 2.590867] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-65.ucode failed with error -2
[ 2.591710] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[ 2.591720] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.25
[ 2.591922] iwlwifi 0000:00:14.3: loaded firmware version 64.97bbee0a.0 so-a0-gf-a0-64.ucode op_mode iwlmvm
[ 2.622564] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x430
[ 2.793899] iwlwifi 0000:00:14.3: loaded PNVM version 0x181407b3
[ 2.811120] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000
[ 2.878298] iwlwifi 0000:00:14.3: base HW address: dc:46:28:66:dd:d4
[ 2.912931] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
The current problem I found working on my bluetooth problem above.
When running bluman-manager without sudo I was getting
(blueman-manager:128917): dbind-WARNING **: 13:48:38.019: Couldn't connect to accessibility bus: Failed to connect to socket /root/.cache/at-spi/bus_0.0: Permission denied
(blueman-manager:129308): dbind-WARNING **: 13:53:54.062: Couldn't connect to accessibility bus: Failed to connect to socket /root/.cache/at-spi/bus_0.0: Permission denied
And now I'm stuck. I'm not sure what the problem is.