|
|
Post by machster28 on Aug 18, 2023 16:41:38 GMT
Hello.
I have installed the beta, Bodhi 7 s76, in a VM and it's passed my tests. I had no issues, so I'd like to move it to a bare metal partition. I've installed it twice on the HD but I have the same issue - I can't seem to get the mouse working - no cursor at all. I am using an HP laptop, but neither the trackpad nor a USB mouse is working.
Any ideas?
Thanks.
|
|
wimc
Moderator 
Posts: 478 
Likes: 411
|
Post by wimc on Aug 19, 2023 1:48:54 GMT
Why not try Bodhi 7 s76 RC, its newer than beta.
|
|
|
|
Post by thewaiter on Aug 19, 2023 5:16:27 GMT
Hmm, I do not think BL7 RC s76 will help. You did not provide any PC specs but I would go with older kernel. Try BL 7 RC only, not s76 which has kernel 6.2.
Stefan
|
|
|
|
Post by machster28 on Aug 19, 2023 14:27:03 GMT
Hmm, I do not think BL7 RC s76 will help. You did not provide any PC specs but I would go with older kernel. Try BL 7 RC only, not s76 which has kernel 6.2. Stefan Hi Stefan,
What specs would you need? It's a fairly recent laptop that's 3 years old with 10th gen Intel CPU and Nvidia 2070 GPU graphics. It usually runs everything I can throw at it. I am currently running kernel 6.4 Fedora fine.
|
|
|
|
Post by machster28 on Aug 19, 2023 14:31:48 GMT
Why not try Bodhi 7 s76 RC, its newer than beta. I'll might I'll try that next, although Sourceforge beta page doesn't list a s76 version with an up-to-date kernel. |
|
|
|
Post by thewaiter on Aug 19, 2023 17:26:26 GMT
Oh, new specs. Such a mystery the mouse is not working.
|
|
|
|
Post by machster28 on Aug 19, 2023 22:46:34 GMT
I installed the RC version, and somehow I found the mouse. It's very possible, in the beta version, it was on a black screen that I couldn't see. Anyhow, I think may have found the problem. I have 3 monitors attached to the laptop and have been working trying to get the setup working. I started with the laptop screen only. Then I slowly added each monitor, one-by-one, using arandr. Unfortunately, somewhere along the line, something would always go haywire, where I'd get some monitors mirroring others and some just black. Eventually, even the built-in monitor would look wonky. Rebooting did not seem to help. I am familiar with the monitor editor, and typically I am comfortable in it. But there seems to be an issue that Bodhi 7 has with it in my setup. At the moment, I am unable to use either version in their current state, but I will try subsequent versions to see if the display issues resolve. |
|
|
|
Post by Hippytaff on Aug 19, 2023 23:39:10 GMT
Thanks for the update. Is the mouse issue resolved? If so can you start a new thread with other issues and I will mark this one as solved.
|
|
|
|
Post by machster28 on Aug 26, 2023 20:13:58 GMT
Thanks for the update. Is the mouse issue resolved? If so can you start a new thread with other issues and I will mark this one as solved. Well, kinda. I am no longer using the s76 beta. There are issues with the RC I shall repost. |
|
|
|
Post by Hippytaff on Aug 27, 2023 23:07:19 GMT
If you’re still having issues please feel free to start a new thread, or continue this one if it’s the same issue. BL7 is now released, so it’d be good to know if the issue has persisted. If it’s possible for you to try BL7 and feed back, that would be great.
|
|
enigma9o7
Crew Member
Posts: 1,436
Likes: 1,338
|
Post by enigma9o7 on Aug 30, 2023 6:00:18 GMT
It sounds likely to me the mouse cursor was on another screen that wasn't turned on.
|
|
