Post by tm1984 on May 4, 2023 3:54:01 GMT
Hello,
My problem is that when I open Terminology and type the command "sudo apt update && sudo apt dist-upgrade", I am prompted "[sudo] password for tom" but when I hit the key to begin entering my password, nothing happens.
Peace,
Tom
System:
Kernel: 5.4.0-72-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Moksha 0.3.3.16896 Distro: Ubuntu 20.04.2 LTS (Focal Fossa)
Machine:
Type: Laptop System: LENOVO product: 80R2 v: Lenovo ideapad 100S-11IBY
serial: <filter>
Mobo: LENOVO model: Aristotle 11.6 v: SDK0K04663 WIN serial: <filter>
UEFI: LENOVO v: E2CN15WW date: 09/12/2018
Battery:
ID-1: axp288_fuel_gauge charge: 92% condition: N/A model: N/A
status: Charging
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse
charge: 55% (should be ignored) status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Keyboard
charge: 55% (should be ignored) status: Discharging
Memory:
RAM: total: 1.87 GiB used: 689.8 MiB (36.0%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Quad Core model: Intel Atom Z3735F bits: 64 type: MCP
arch: Silvermont rev: 8 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 10666
Speed: 500 MHz min/max: 500/1833 MHz Core speeds (MHz): 1: 500 2: 500
3: 677 4: 684
Graphics:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa
tty: N/A
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: bytcr-rt5640 driver: bytcr-rt5640
message: bus/chip ids unavailable
Device-2: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
message: bus/chip ids unavailable
Sound Server: ALSA v: k5.4.0-72-generic
Network:
Message: No Device data found.
IF-ID-1: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 29.12 GiB used: 5.57 GiB (19.1%)
ID-1: /dev/mmcblk1 model: BGND3R size: 29.12 GiB
Partition:
ID-1: / size: 28.04 GiB used: 5.57 GiB (19.9%) fs: ext4
dev: /dev/mmcblk1p2
ID-2: /boot/efi size: 511.0 MiB used: 304 KiB (0.1%) fs: vfat
dev: /dev/mmcblk1p1
Sensors:
Missing: Required tool sensors not installed. Check --recommends
Repos:
Active apt repos in: /etc/apt/sources.list
1: deb au.archive.ubuntu.com/ubuntu/ focal main restricted
2: deb au.archive.ubuntu.com/ubuntu/ focal-updates main restricted
3: deb au.archive.ubuntu.com/ubuntu/ focal universe
4: deb au.archive.ubuntu.com/ubuntu/ focal-updates universe
5: deb au.archive.ubuntu.com/ubuntu/ focal multiverse
6: deb au.archive.ubuntu.com/ubuntu/ focal-updates multiverse
7: deb au.archive.ubuntu.com/ubuntu/ focal-backports main restricted universe multiverse
8: deb security.ubuntu.com/ubuntu focal-security main restricted
9: deb security.ubuntu.com/ubuntu focal-security universe
10: deb security.ubuntu.com/ubuntu focal-security multiverse
Active apt repos in: /etc/apt/sources.list.d/bodhi-repositories.list
1: deb packages.bodhilinux.com/bodhi focal b6main
Info:
Processes: 167 Uptime: 35m Init: systemd runlevel: 5 Compilers: gcc: 9.3.0
Shell: bash v: 5.0.17 inxi: 3.0.38
My problem is that when I open Terminology and type the command "sudo apt update && sudo apt dist-upgrade", I am prompted "[sudo] password for tom" but when I hit the key to begin entering my password, nothing happens.
Peace,
Tom
System:
Kernel: 5.4.0-72-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Moksha 0.3.3.16896 Distro: Ubuntu 20.04.2 LTS (Focal Fossa)
Machine:
Type: Laptop System: LENOVO product: 80R2 v: Lenovo ideapad 100S-11IBY
serial: <filter>
Mobo: LENOVO model: Aristotle 11.6 v: SDK0K04663 WIN serial: <filter>
UEFI: LENOVO v: E2CN15WW date: 09/12/2018
Battery:
ID-1: axp288_fuel_gauge charge: 92% condition: N/A model: N/A
status: Charging
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse
charge: 55% (should be ignored) status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Keyboard
charge: 55% (should be ignored) status: Discharging
Memory:
RAM: total: 1.87 GiB used: 689.8 MiB (36.0%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Quad Core model: Intel Atom Z3735F bits: 64 type: MCP
arch: Silvermont rev: 8 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 10666
Speed: 500 MHz min/max: 500/1833 MHz Core speeds (MHz): 1: 500 2: 500
3: 677 4: 684
Graphics:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa
tty: N/A
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: bytcr-rt5640 driver: bytcr-rt5640
message: bus/chip ids unavailable
Device-2: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
message: bus/chip ids unavailable
Sound Server: ALSA v: k5.4.0-72-generic
Network:
Message: No Device data found.
IF-ID-1: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 29.12 GiB used: 5.57 GiB (19.1%)
ID-1: /dev/mmcblk1 model: BGND3R size: 29.12 GiB
Partition:
ID-1: / size: 28.04 GiB used: 5.57 GiB (19.9%) fs: ext4
dev: /dev/mmcblk1p2
ID-2: /boot/efi size: 511.0 MiB used: 304 KiB (0.1%) fs: vfat
dev: /dev/mmcblk1p1
Sensors:
Missing: Required tool sensors not installed. Check --recommends
Repos:
Active apt repos in: /etc/apt/sources.list
1: deb au.archive.ubuntu.com/ubuntu/ focal main restricted
2: deb au.archive.ubuntu.com/ubuntu/ focal-updates main restricted
3: deb au.archive.ubuntu.com/ubuntu/ focal universe
4: deb au.archive.ubuntu.com/ubuntu/ focal-updates universe
5: deb au.archive.ubuntu.com/ubuntu/ focal multiverse
6: deb au.archive.ubuntu.com/ubuntu/ focal-updates multiverse
7: deb au.archive.ubuntu.com/ubuntu/ focal-backports main restricted universe multiverse
8: deb security.ubuntu.com/ubuntu focal-security main restricted
9: deb security.ubuntu.com/ubuntu focal-security universe
10: deb security.ubuntu.com/ubuntu focal-security multiverse
Active apt repos in: /etc/apt/sources.list.d/bodhi-repositories.list
1: deb packages.bodhilinux.com/bodhi focal b6main
Info:
Processes: 167 Uptime: 35m Init: systemd runlevel: 5 Compilers: gcc: 9.3.0
Shell: bash v: 5.0.17 inxi: 3.0.38