mdiemer
Crew Member
Posts: 63
Likes: 55
|
Post by mdiemer on Jan 1, 2021 1:40:16 GMT
Just wanted to verify: The only way to change log-in (for example, from automatic to password) is via the terminal, right? I can't find any GUI-based way to do it in Bodhi 5.1. I usually opt for the password log-in when I install, but this time somehow I ended up with automatic. Now I would like to set it to be password login.
Thanks and Happy New Year from Maine,
Mike
|
|
37bodie
Crew Member
Learning Bodhi Linux (I hope)
Posts: 64
Likes: 22
|
Post by 37bodie on Jan 1, 2021 11:49:10 GMT
|
|
|
Post by thewaiter on Jan 1, 2021 12:44:04 GMT
|
|
mdiemer
Crew Member
Posts: 63
Likes: 55
|
Post by mdiemer on Jan 2, 2021 19:38:37 GMT
Thanks for the responses guys, but I'm not having any luck. I installed Swami but can't find any way to deal with password. Also installed the gnome tools, but there again I can see no way to deal with password issue, just change users etc. Or change p/w, but nothing to reset login option.
I found a tutorial for doing this via terminal. I use the terminal a lot, but in this case I'm reluctant, as a foul-up may render system unbootable.
|
|
|
Post by Hippytaff on Jan 2, 2021 19:52:09 GMT
Thanks for the responses guys, but I'm not having any luck. I installed Swami but can't find any way to deal with password. Also installed the gnome tools, but there again I can see no way to deal with password issue, just change users etc. Or change p/w, but nothing to reset login option. I found a tutorial for doing this via terminal. I use the terminal a lot, but in this case I'm reluctant, as a foul-up may render system unbootable. Is it possible to take a snapshot with Timeshift before you attempt the cli solution?
|
|
mdiemer
Crew Member
Posts: 63
Likes: 55
|
Post by mdiemer on Jan 3, 2021 1:21:07 GMT
Thanks for the responses guys, but I'm not having any luck. I installed Swami but can't find any way to deal with password. Also installed the gnome tools, but there again I can see no way to deal with password issue, just change users etc. Or change p/w, but nothing to reset login option. I found a tutorial for doing this via terminal. I use the terminal a lot, but in this case I'm reluctant, as a foul-up may render system unbootable. Is it possible to take a snapshot with Timeshift before you attempt the cli solution? Yes, if that would get me back to a point before the damage was done. Thanks for reminding me, I haven't yet made a restore point since installation, so I'll do it now.
|
|
enigma9o7
Crew Member
Posts: 1,427
Likes: 1,336
|
Post by enigma9o7 on Jan 3, 2021 2:08:54 GMT
Hopefully the tutorial says something like set autologin-user=false instead of autologin-user=username? sudo nano /etc/lightdm/lightdm.conf Also, your first question never asked how to do it from command line; when I noticed it earlier I assumed you already knew how and were just confirming there were no GUIs for it.. as I didn't know a GUI way I didn't answer right away, but if you had asked how originally I would have let you know directly editing lightdm.conf is the normal way to do it for bodhi...
Technically you can do it without the terminal too. Open leafpad or any text editor with sudo from the quick launcher then navigate to /etc/lightdm and open lightdm.conf and edit it. No terminal needed.
|
|
mdiemer
Crew Member
Posts: 63
Likes: 55
|
Post by mdiemer on Jan 3, 2021 19:46:43 GMT
Hopefully the tutorial says something like set autologin-user=false instead of autologin-user=username? sudo nano /etc/lightdm/lightdm.conf Also, your first question never asked how to do it from command line; when I noticed it earlier I assumed you already knew how and were just confirming there were no GUIs for it.. as I didn't know a GUI way I didn't answer right away, but if you had asked how originally I would have let you know directly editing lightdm.conf is the normal way to do it for bodhi...
Technically you can do it without the terminal too. Open pcmanfm with sudo from the quick launcher then navigate to /etc/lightdm and open lightdm.conf with leafpad and edit it. No terminal needed. Or open any text editor from quick launcher with sudo then open the file and edit it.
Thanks. I just also realized I have not yet made a system image of Bodhi. I'm downloading Rescuezilla. I know how to use Clonezilla, but it does require total concentration, and a slip-up could be costly. Hopefully Rescuezilla will work as well as advertised. A bonus is that, like Clonezilla, it works on any operating system.
|
|
mdiemer
Crew Member
Posts: 63
Likes: 55
|
Post by mdiemer on Jan 4, 2021 22:44:21 GMT
Actually, Rescuezilla didn't work out. none of that stuff ever does for me (Redoo, Rescatux for example). So I used Clonezilla. I wasn't giving myself enough credit, I know how to use it fine. I just don't trust my brain as much at this time of the year...
So now I can go ahead and try some things to change login preferences.
|
|
mike11
Member
Posts: 4
Likes: 3
|
Post by mike11 on Apr 17, 2021 21:12:29 GMT
Hello Mdiemer,
I am facing the same issue. How did you solve your problem?
Best wishes, Mike
|
|
enigma9o7
Crew Member
Posts: 1,427
Likes: 1,336
|
Post by enigma9o7 on Apr 18, 2021 3:13:16 GMT
I am facing the same issue. How did you solve your problem? I think he originally asked for a way to disable autologin from a GUI, but then later determined he just wanted to disable autologin, so pretty sure it was resolved above. This is by far the simplest method than trying to find a GUI to do it if nobody knows of one already... Incase the solution got lost in the clutter above, just remove your username from /etc/lightdm/lightdm.conf using any editor you like. or change it to any word in the world that isn't a username on your computer. It will be on the line that says autologin-user= but is the only time your username is in that file anyway.
Here's a video showing how to remove it without using command line.
I tried to do as much as I could with mouse in the video to show exactly the steps, but its quicker with keyboard if you don't want to waste 47 seconds.
1. Alt+Esc for quick launcher 2. type leadpad then press TAB 3. arrow down to launch with sudo 4. Ctrl+O to open file 5. select file system and etc folder (for this i'd probably use mouse) 6. type lightdm to find that folder quickly 7. select the lightdm.conf file
8. delete or change username 9. Ctrl+S to save file 10. Ctrl+Q to quit
|
|
mike11
Member
Posts: 4
Likes: 3
|
Post by mike11 on Apr 19, 2021 14:52:40 GMT
Hello Enigma,
thank you for your help. I had to use the command line. I realised /etc/lightdm/lightdm.conf was empty. Then I inserted
[Seat:*] autologin-user= (nothing after the = )
and the autologin was deactivated. I then installed gnome-sytem-tools via the synaptic manager as given above and could add users to the system. All pretty good. I just don't know how the autologin got activated. I can't remember seeing that field... well... possibly too much beer ;-)
I am running bodhi linux on a Dell Latitude E6500 purchased in 2009, still having the original set up, i.e. no SSD. I am pretty impressed by the snappiness! It seems it is not even necessary to put in an SSD for the sake of performance.
All the best, Mike.
|
|
enigma9o7
Crew Member
Posts: 1,427
Likes: 1,336
|
Post by enigma9o7 on Apr 19, 2021 16:44:32 GMT
Actually that is a mystery. If you selected autologin during installation, it should have created the file as I showed.
If there was no file there, then autologin most likely was coming from a file in the /etc/lightdm/lightdm.conf.d/ directory, but I dont think that's where bodhi's installer woulda put it.
|
|